Consequence
Speaker Cable
MIAMEN Consequence
Conductors: OCC, 7N
Screen: Copper braid
Wire dia./cross section: 12×2,05mm/12×3,31mm2
Cable diameter: ~ 19mm
Antistatic Couplers: Available
Filter: No applicable
Plugs: AML-ACP20 Rh (spade/banana)
Options: Single-wire, Bi-wire, Bi-amp
Miamen Consequence – the top
speaker cable on our offer. The cable is made from the world purest copper: OCC
(Ohno Continous Casting). Each of 12 helical twisted multiconductor wires is
built of 45 polished microconductors. Miamen Consequence is double screened in
Multi-Shields system; unique braids of different density are applied to provide
full protection against external influences. The development of
Multi-Shields system was a highly labour-consuming process that involved
hundreds of hours spent in the laboratory. Multi-Shields screening system
results in large outer diameter, which prompted us to design new rhodium-plated
plugs. To achieve the best mechanical properties, the connectors are
rhodium-plated in the two-stage galvanisation process. Thanks to this, the
layer is resistant to damages and is ten times thicker than after a standard
galvanisation. Consequence Series is strongly recommended for Hi-End systems.
Over the years, the cable has changed together with our development and
introduction of new technologies. Our improvements and new versions of cables
always aim to refine some important details. Over time, these changes are
becoming more subtle. The latest version of the cable is marked as modification
0.3. The most important changes: Miamen was equipped with Acoustics Points
POM-C AP50 antistatic coupler in order to provide an excellent protection from
static electrical changes. The elimination of micro charges on the cable
surface helps to deliver a lossless signal. In the previous version was
introduced new way of wire termination (in the new process the wires are tightly
twisted coaxially). In the latest modification, we focused mainly on the
introduction of our new authorial connectors. The AML-ACP20 Rh plugs (both
spade and banana) are made of brass, coated with a double layer of rhodium (a
thickly coated rhodium layer was obtained in a double DCP process) to ensure
the best signal transmission. The plug body is made of non-magnetic anti-static
material (POM-C AP50), which protects against overvoltages. Although the
changes also incorporate the visual design, the cable maintains the character,
uniqueness and the colour scheme of the Consequence series.
Miamen Consequence – Speaker Cable – High Fidelity (Polish): online
Miamen Consequence – Speaker Cable – Hi-Fi i Muzyka (Polish): pdf
Miamen & Pearl Consequence – Audiostereo.pl (Polish): pdf
Consequence Series – DTOWN (Hebrew): online
Consequence Series – Audio Video Magazine (Portuguese): pdf
Consequence Series – Mono and Stereo (English): online
Cables from Audiomica Laboratory – Positive Feedback (English): online
Inquire or place an order: You can purchase or rent Audiomica products contacting one of our retail partner or dealer. If our products are not available in your country or you have any individual / special request, please contact us directly: Mobile: +48 535 524 835 (Call or message via WhatsApp), Email: info@audiomica.com or use the contact form below:
Conductors: OCC, 7N
Screen: Copper braid
Wire dia./cross section: 12×2,05mm/12×3,31mm2
Cable diameter: ~ 19mm
Antistatic Couplers: Available
Filter: No applicable
Plugs: AML-ACP20 Rh (spade/banana)
Options: Single-wire, Bi-wire, Bi-amp
Miamen Consequence – the top
speaker cable on our offer. The cable is made from the world purest copper: OCC
(Ohno Continous Casting). Each of 12 helical twisted multiconductor wires is
built of 45 polished microconductors. Miamen Consequence is double screened in
Multi-Shields system; unique braids of different density are applied to provide
full protection against external influences. The development of
Multi-Shields system was a highly labour-consuming process that involved
hundreds of hours spent in the laboratory. Multi-Shields screening system
results in large outer diameter, which prompted us to design new rhodium-plated
plugs. To achieve the best mechanical properties, the connectors are
rhodium-plated in the two-stage galvanisation process. Thanks to this, the
layer is resistant to damages and is ten times thicker than after a standard
galvanisation. Consequence Series is strongly recommended for Hi-End systems.
Over the years, the cable has changed together with our development and
introduction of new technologies. Our improvements and new versions of cables
always aim to refine some important details. Over time, these changes are
becoming more subtle. The latest version of the cable is marked as modification
0.3. The most important changes: Miamen was equipped with Acoustics Points
POM-C AP50 antistatic coupler in order to provide an excellent protection from
static electrical changes. The elimination of micro charges on the cable
surface helps to deliver a lossless signal. In the previous version was
introduced new way of wire termination (in the new process the wires are tightly
twisted coaxially). In the latest modification, we focused mainly on the
introduction of our new authorial connectors. The AML-ACP20 Rh plugs (both
spade and banana) are made of brass, coated with a double layer of rhodium (a
thickly coated rhodium layer was obtained in a double DCP process) to ensure
the best signal transmission. The plug body is made of non-magnetic anti-static
material (POM-C AP50), which protects against overvoltages. Although the
changes also incorporate the visual design, the cable maintains the character,
uniqueness and the colour scheme of the Consequence series.
Miamen Consequence – Speaker Cable – High Fidelity (Polish): online
Miamen Consequence – Speaker Cable – Hi-Fi i Muzyka (Polish): pdf
Miamen & Pearl Consequence – Audiostereo.pl (Polish): pdf
Consequence Series – DTOWN (Hebrew): online
Consequence Series – Audio Video Magazine (Portuguese): pdf
Consequence Series – Mono and Stereo (English): online
Cables from Audiomica Laboratory – Positive Feedback (English): online
Inquire or place an order: You can purchase or rent Audiomica products contacting one of our retail partner or dealer. If our products are not available in your country or you have any individual / special request, please contact us directly: Mobile: +48 535 524 835 (Call or message via WhatsApp), Email: info@audiomica.com or use the contact form below:
Price from 5290€*excl. tax (2,5m, single-wire)
Authorial Plugs
Orginal solutions and unique processes
Spade
Banana
-
AML-ACP20-Rh
Conductive Surface: DCP Rhode
Body: Antistatic POM-C AP50
Technology: DCP, demagnetization
AML-ACP10-Rh
Conductive Surface: DCP Rhode
Body: Antistatic POM-C AP50
Technology: DCP, demagnetization
-
AML-ACP20-Rh
Conductive Surface: DCP Rhode
Body: Antistatic POM-C AP50
Technology: DCP, demagnetization
AML-ACP10-Rh
Conductive Surface: DCP Rhode
Body: Antistatic POM-C AP50
Technology: DCP, demagnetization
Check out more
Consequence Series
Discover our collection of Consequence cables.